EIB Actuators for Service Distribution Board Installation
EIB Actuators for Service Distribution Board InstallationREG 6/12-way switch actuators (16 A)
The 6-way and 12-way binary outputs are used for switching of lighting and other loads (such as ventilation, heating, ...) in conjunction with other EIB devices. It is thus possible to switch 6 or 12 loads or load groups which are independent of each other and to assign each channel to its own phase. One manual operator per channel simultaneously serves as a switching state display on the device. The 12-way binary output includes two 6-way actuators in an enclosure. Every 6-way actuator has its own bus interface coupler and the 12-way actuator has two meaning it has to be programmed twice on the ETS. REG 4/6-way blind actuators (6 A)
The 4-way and 6-way blind actuator is used for control of electric blinds, electric shutters, electric windows and electric sunblind's in conjunction with other EIB devices. At the same time, it is possible to control 4 or 6 motor drives which are independent of each other, and to assign every channel with its own phase. All outputs also possess an additional manual operator on the device which can be actuated without bus voltage being applied. All drives must be equipped with an integral end-position switch or an integral electrical end limit detection system.
| |||||||||||||||
(362 KB)
(125 KB)